Which Kit Do I Need?
Use this quick guide to choose the right PaintBlox Pro™ kit for your work. The four kits scale with the size of your job: Project handles a DIY room or kitchen refresh, Pro takes on whole-house projects, Crew handles exterior siding and multi-room staging, and Shop delivers production-level throughput for millwork shops. As you move up the tiers you gain drying capacity while the core benefits stay the same: protect your finishes, save floor space, and keep jobs moving.
All PaintBlox kits are interchangeable and work with each other. If you need more capacity, there's always a solution. Just add another kit.
Kitchen or Room Refresh
Start with Project, then step up to Pro, Crew, or Shop for more capacity.
Multi Room Trim - Kitchen
Pro is the sweet spot — size up to Crew or Shop for volume runs.
Millwork Shop
Shop is the production-grade workhorse, built for daily, high-volume finishing.
Which PaintBlox Pro kit do I need?
Select your board width and length, then enter either the number of boards or your total linear feet. The calculator factors in board width to give you the most accurate PaintBlox Pro kit recommendation for your project.
How many boards does each kit dry?
About how many boards a full kit holds. Same counts for 5/4 material.
Boards 12' and under
| Board | Project 24 | Pro 48 | Crew 72 | Shop 96 |
|---|---|---|---|---|
| 1x4 | 66 | 132 | 198 | 264 |
| 1x6 | 42 | 84 | 126 | 168 |
| 1x8 | 30 | 60 | 90 | 120 |
| 1x10 | 24 | 48 | 72 | 96 |
| 1x12 | 24 | 48 | 72 | 96 |
| Drying layers | 6 | 12 | 18 | 24 |
Boards over 12'
| Board | Project 24 | Pro 48 | Crew 72 | Shop 96 |
|---|---|---|---|---|
| 1x4 | 44 | 88 | 132 | 176 |
| 1x6 | 28 | 56 | 84 | 112 |
| 1x8 | 20 | 40 | 60 | 80 |
| 1x10 | 16 | 32 | 48 | 64 |
| 1x12 | 16 | 32 | 48 | 64 |
| Drying layers | 4 | 8 | 12 | 16 |
- Boards per layer on a 4' furring strip: 1x4 = 11, 1x6 = 7, 1x8 = 5, 1x10 and 1x12 = 4.
- Boards 12' and under use 4 PaintBlox™ per layer; over 12' use 6.
- Flexible boards, PVC, composite and fiber cement siding might need more bunks per layer, so a kit might hold fewer boards.